中国计量大学学报2017，Vol.28Issue(1)：45-50,6.DOI:10.3969/j.issn.2096-2835.2017.01.008
刹车片尺寸自动检测装置设计
Design of automatic testing devices for brake pad size
胡琳丽 1徐志玲 2张新娜 2汪钰锟 2王靖玮2
作者信息
- 1. 中国计量大学计量测试工程学院,浙江杭州310018
- 2. 中国计量大学现代科技学院,浙江杭州310018
- 折叠
摘要
Abstract
The detection efficiency of the manual measurement method of brake pad size is low and the measurement result is easily affected by human factors.To improve the detection efficiency and precision of brake pad size,this paper presented an automatic detection device based on machine vision.The detection device principle,its mechanical structure as well as the electrical control system and image processing system were introduced.The PLC was used to control the blanking,transmission,detection,elimination and recovery of brake pads.The results show that the detection efficiency of the device is significantly higher than that of the manual detection method with a dynamic detection accuracy of 0.02 mm.关键词
刹车片/自动检测/PLC技术/图像处理Key words
brake pad/automatic detection/PLC technology/image processing分类
信息技术与安全科学引用本文复制引用
胡琳丽,徐志玲,张新娜,汪钰锟,王靖玮..刹车片尺寸自动检测装置设计[J].中国计量大学学报,2017,28(1):45-50,6.
