铸造技术2016，Vol.37Issue(7)：1488-1492,1506,6.DOI:10.16410/j.issn1000-8365.2016.07.051
国产首台三机三流直弧形板坯连铸机的设计特点
Design Feature of Three Strand Straight Arc Type of Slab Continuous Caster
陈阳 1周干水 2邹旭 1宁曙光 1张冬平 1熊宏杰 1韩峰1
作者信息
- 1. 中冶连铸技术工程有限责任公司,湖北武汉430073
- 2. 北京科技大学冶金与生态工程学院,北京100083
- 折叠
摘要
Abstract
For matching up new 3# 120 t converter production in a steel-making plant,the first three strand straight arc type of slab continuous caster was built,which can produce the slabs with the section of 180/200 mm×(900～1250)mm in three strand mode.The new technologies of unique segment drive arrangement,new-type hydraulic oscillation,composite mold,roller's arrangement,tundish flow field optimization,continuous straightening and bending,dynamic secondary cooling etc.were used in the slab continuous caster.As of January 14,2016,the caster have cumulatively produced 18 090 t slab,all kinds of metallurgical indicators meet the design requirements,excellent inner quality of slab and surface without defects,actual useful effect is satisfactory.关键词
直弧形/板坯连铸机/液压振动/连续矫直/二冷动态配水Key words
straight arc/slab continuous caster, hydraulic oscillation/continuous straightening/dynamic second cooling分类
冶金工业引用本文复制引用
陈阳,周干水,邹旭,宁曙光,张冬平,熊宏杰,韩峰..国产首台三机三流直弧形板坯连铸机的设计特点[J].铸造技术,2016,37(7):1488-1492,1506,6.
