铸造技术2016，Vol.37Issue(8)：1759-1761,3.DOI:10.16410/j.issn1000-8365.2016.08.059
镁合金电控箱体的砂型铸造工艺研究
Study on Sand Mould Casting Process for Magnesium Alloy Electric Control Box
董晟全 1王海涛 1董文祥 2于阳 1高丰 1梁艳峰1
作者信息
- 1. 西安工业大学材料与化工学院,陕西西安710032
- 2. 中国兵器工业集团第202研究所,陕西成阳712099
- 折叠
摘要
Abstract
The new forming process of sand mould casting for magnesium alloy electric control box was studied,and the optimizing process of pouring technology was discussed.The casting technology and solidification process were numerically simulated to predict casting defects and repeatedly optimize process design,so as to get the optimal design process with smooth mold filling and reasonable solidification sequence.Experiments show that,after the technical optimization,the defects in the produced casting are rare,the optimal process can be used for mass production.关键词
砂型铸造/数值模拟/成型工艺Key words
sand casting/numerical simulation/molding process分类
金属材料引用本文复制引用
董晟全,王海涛,董文祥,于阳,高丰,梁艳峰..镁合金电控箱体的砂型铸造工艺研究[J].铸造技术,2016,37(8):1759-1761,3.
