铸造技术2016，Vol.37Issue(9)：1824-1826,3.DOI:10.16410/j.issn1000-8365.2016.09.007
钛合金切削刀具用复合材料的制备与性能研究
Study on Preparation and Properties of Composite Materials for Cutting Tools of Titanium Alloy
刘睿 1刘晶2
作者信息
- 1. 宁夏司法警官职业学院,宁夏银川750021
- 2. 宁夏大学机械工程学院,宁夏银川750021
- 折叠
摘要
Abstract
Through adding grapheme and TiC into YG6 cemented carbide powder and using the ball-milling-sintering method,the composites materials used for cutting tools of titanium alloy were produced.Meanwhile,the microstructure,mechanical properties and milling performance of the composites were also investigated.The results show that the addition of grapheme and TiC can improve the mechanical property and milling performance of the composites materials,especial when adding 0.35％ grapheme and 0.15％ TiC;compared with the YG6 cemented carbide powder without addition,the composites materials with the addition of 0.35％ grapheme and 0.15％ TiC can be improved by 53.0％ in the bending strength,while reduced by 82.3％ in wear volume.关键词
钛合金/切削刀具/复合材料/铣削性能/石墨烯/复合添加Key words
titanium alloy/cutting tool/composite material/milling performance/graphene/composite adding分类
矿业与冶金引用本文复制引用
刘睿,刘晶..钛合金切削刀具用复合材料的制备与性能研究[J].铸造技术,2016,37(9):1824-1826,3.
