铸造技术2016，Vol.37Issue(9)：1981-1983,3.DOI:10.16410/j.issn1000-8365.2016.09.050
回旋针冷挤压成形数值模拟分析
Numerical Simulation Analysis on Cold Extrusion Forming of Cyclotron Needle
李炳 1陈伟 1陈丹1
作者信息
- 1. 广东科技学院机电工程系,广东东莞523000
- 折叠
摘要
Abstract
The 2A11 duralumin cyclotron needle is difficult to cut because of samll size,and the cold extrusion forming is used to prepare it due to its good plasticity.The cold extrusion forming of cyclotron needle was simulated by DEFORM-3D software.The results show that the forming part of the cold extrusion process shows a full filling and good quality,which not only to save material and improve the efficiency greatly.关键词
回旋针/塑性成形/冷挤压/数值模拟Key words
cyclotron needle/plastic forming/cold extrusion/numerical simulation分类
金属材料引用本文复制引用
李炳,陈伟,陈丹..回旋针冷挤压成形数值模拟分析[J].铸造技术,2016,37(9):1981-1983,3.
