电力工程技术2017，Vol.36Issue(2)：9-13,50,6.
适用于有高差线路的覆冰输电导线ANSYS找形方法
Form-finding Method of Transmission Lines Consulting the Lowest Point
摘要
Abstract
Ice covering on the transmission line has great impact on power system security.Form-finding of transmission line is the basis for mechanical analysis of iced transmission line by ANSYS.Current form-finding methods end with the convergence of sag or the horizontal stress, which is hard to obtain in transmission lines with height difference while the maximum sag isn`t in the center position.Therefore, this paper presented a form-finding method of transmission lines consulting the lowest point.The method obtained the lowest point by analytic method first, then modified the elastic modulus for coming near the lowest point, and repeated the iteration until the line reaches the lowest point after changing the elastic modulus back to actual value.Simulation results show the effectiveness of the proposed method for different types of transmission lines.关键词
ANSYS/输电导线/找形/最低点Key words
ANSYS/transmission lines/form-finding/the lowest point分类
信息技术与安全科学引用本文复制引用
谢云云,金颖,黄琳雁,刘旭斐,王昊昊,郁琛..适用于有高差线路的覆冰输电导线ANSYS找形方法[J].电力工程技术,2017,36(2):9-13,50,6.基金项目
国家自然科学基金项目(51507080,61673213) （51507080,61673213）
江苏省博士后基金资助项目(1402042C) （1402042C）
