中国粉体技术2017，Vol.23Issue(2)：49-53,92,6.DOI:10.13732/j.issn.1008-5548.2017.02.010
LNI-66A型分级式冲击磨磨损实验研究
Experimental study on wear of LNI-66A classify-impact mill
摘要
Abstract
The impacts of number of beater and beater height change to yield,beater wear amount and disc wear amount of mill were investigated,using LNI-66A classify-impact mill to crush buffalo horn powder.The experimental results show that the powder yield decreases along with the increase of number of beater,first increases then decreases along with the increase of beater height.When the number of beater is 4 and the beater height is 30 mm,yield of powder is the highest.The beater wear amount decreases along with the increase of number of beater,first decreases then increases along with the increase of beater height.When the beater height is 30 mm,beater wear amount is the lowest.With the number of beater and beater height increase,the disc wear amount of mill has no change.关键词
分级式冲击磨/磨损/锤头/工艺参数Key words
classify-impact mill/wear/beater/process parameters分类
通用工业技术引用本文复制引用
陈俊冬,曾川,李鹏超,邹鹏程,王晓天..LNI-66A型分级式冲击磨磨损实验研究[J].中国粉体技术,2017,23(2):49-53,92,6.基金项目
国家自然科学基金项目,编号:11402218 （）
固体废物处理与资源化教育部重点实验室平台基金,编号:13zxgk05. （）
