中国塑料2017，Vol.31Issue(4)：75-80,6.DOI:10.19491/j.issn.1001-9278.2017.04.014
FDM快速成型工艺对成型件力学性能的影响
Effect of Rapid Prototyping Technique on Mechanical Properties of Plastic Parts Through FDM Process
刘亚 1何冰 2陈鹏飞 1赵海超 2薄夫祥1
作者信息
- 1. 江苏徐州工程机械研究院,江苏徐州221004
- 2. 徐工集团高端工程机械智能制造国家重点实验室,江苏徐州221004
- 折叠
摘要
Abstract
Taking ABS-M30,PPSF and Ultem 9085 3D printing materials as three typical cases,the plastic parts were formed through a fused deposition modeling (FDM) method,and the effect of raw materials,setting angles and printer nozzles on the mechanical properties of the parts were investigated.The results indicated that the tensile and impact strength increased at first and tended to decrease afterwards when the setting angels of printer varied from 0 ° to 90 °,and they achieved maximum values at the setting angel of 45 °.The flexural strength increased with an increase of setting angel.Moreover,the plastic parts formed by T16-type printer nozzle gained better mechanical properties than that formed by T12-type nozzle at the same position angle.关键词
快速成型/放置角度/填充方式/力学性能Key words
rapid prototyping/position angle/filling way/mechanical property分类
化学化工引用本文复制引用
刘亚,何冰,陈鹏飞,赵海超,薄夫祥..FDM快速成型工艺对成型件力学性能的影响[J].中国塑料,2017,31(4):75-80,6.
