中国塑料2017，Vol.31Issue(4)：102-105,4.DOI:10.19491/j.issn.1001-9278.2017.04.019
汽车内饰把手气辅注射成型模具设计
Design of Gas-assisted Injection Molds for Car Interior Door Handles
杜林芳 1苗秋玲1
作者信息
- 1. 河南机电职业学院机械工程学院,河南郑州451191
- 折叠
摘要
Abstract
An injection mould for a car interior handle was designed by using an inverse blowing gasassisted molding technology in a full injection mode.When designing the groove structure for melt overflow,cut-off valve and hot runner nozzle were introduced into the mould so as to improve the efficiency of melt overflow and also to overcome the defects appearing in the inverse blowing gasassisted molding.With the use of a horn-shape latent gate and the reasonable setting of ejection position,the aspects without any gate and ejector marks were guaranteed for the injection molded parts.This mould has been used for the production of parts,and the products exhibit a good appearance as well as a lightweight feature with a reduction in weight by 20 ％ compared with the similar products.关键词
逆吹式/气辅成型/溢料槽/切断阀/缩痕Key words
inverse blowing type/gas-assisted injection molding/resin-overflow groove/cut-off valve/shrinkage mark分类
化学化工引用本文复制引用
杜林芳,苗秋玲..汽车内饰把手气辅注射成型模具设计[J].中国塑料,2017,31(4):102-105,4.
