| 注册
首页|期刊导航|照明工程学报|基于成像型亮度计的车灯配光性能检测系统研究

基于成像型亮度计的车灯配光性能检测系统研究

谢祖通 翁晓伟 陈爱华

照明工程学报2017,Vol.28Issue(2):61-64,4.
照明工程学报2017,Vol.28Issue(2):61-64,4.DOI:10.3969/j.issn.1004-440X.2017.02.013

基于成像型亮度计的车灯配光性能检测系统研究

Study on Light Distribution Test Based on Imaging Luminance Meter

谢祖通 1翁晓伟 1陈爱华2

作者信息

  • 1. 台州市质量技术监督检测研究院,浙江 台州 318000
  • 2. 台州学院,浙江台州 318000
  • 折叠

摘要

Abstract

Aimed at the disadvantage of traditional light distribution test system which includes structural complexity, cost expensive and time consuming, this paper proposes a new method to test light distribution based on imaging luminance meter.The system adopts CCD sensor to get light intensity which is shown by digital images.And detects cut-off line of lower beam light which is used to devide light distribution area into intense light region and low light region.The system uses two cameras with difference apertures to detect these areas respectively.In order to enlarge dynamic range of sensor sensitivity, the system adjusts exposure time automatically.The system identifies relationship between the luminance of the measurement pionts and the gray-level of the image pixels.According to the gray-level of the image pixels, the illumination of detection points are detected.Experiments show that the proposed system can instead of traditional test system range of allowable error.The proposed system is simple,rapid detection, low cost and stable operation.

关键词

配光检测/CCD传感器/明暗截止线/曝光时间

Key words

light distribution test/CCD sensor/cut-off line/exposure time

分类

信息技术与安全科学

引用本文复制引用

谢祖通,翁晓伟,陈爱华..基于成像型亮度计的车灯配光性能检测系统研究[J].照明工程学报,2017,28(2):61-64,4.

照明工程学报

OACSTPCD

1004-440X

访问量0
|
下载量0
段落导航相关论文