中南大学学报（自然科学版）2017，Vol.48Issue(4)：860-866,7.DOI:10.11817/j.issn.1672-7207.2017.04.002
二十辊轧机轧制极薄带的板形控制
Plate shape control of ultra thin strip rolling for 20-high mill
摘要
Abstract
To improve the accuracy of roll flattening calculation for 20-high mill, a new and more accurate roll flattening model was proposed. In this model, the roll barrel was considered as a finite length semi-infinite body. Based on the boundary integral equation method, an accurate roll flattening model was established. Based on the new roll flattening model, coupled with roll bending model, strip plastic deformation model, a new and more accurate plate control model for 20-high mill was established. Based on the new model, for the particularly thin strip rolling process, the effects of taper angle and axial shift of the first intermediate roll were analyzed, and the accuracy of the new model was certified by rolling test. The results show that the taper angle and axial shift of the first intermediate roll have greater influence on the shape control, and small changes in the shape of the roll gap will cause great changes of flatness.关键词
二十辊轧机/辊间压扁/有限长半无限体/边界积分方程/极薄带轧制Key words
20-high mill/roll flattening/finite length semi-infinite body/boundary integral equation method/ultra thin strip rolling分类
矿业与冶金引用本文复制引用
员征文,任忠凯,肖宏,余超..二十辊轧机轧制极薄带的板形控制[J].中南大学学报（自然科学版）,2017,48(4):860-866,7.基金项目
国家自然科学基金资助项目(51474190) （51474190）
河北省自然科学基金资助项目(E2015203311)(Project (51474190) supported by the National Natural Science Foundation of China （E2015203311）
Project (E2015203311) supported by the Natural Science Foundation of Hebei Province) （E2015203311）
