玻璃钢/复合材料Issue(5)：28-33,6.
树脂基三维机织复合材料拉伸失效模式研究
TENSILE FAILURE MODE INVESTIGATION OF POLYMER MATRIX 3D-WOVEN COMPOSITE
摘要
Abstract
Two fracture locations were normally observed on the tensile specimens when polymer matrix 3D-woven composites were tested under uniaxial tension.Moreover,one of the fracture locations was mostly at the gripping area and appeared to be compressive failure.With the use of explicit FEA and stress wave theory,the displacement and strain of the specimen after failure were studied.The result shows that the compressive strain caused by the stress wave at the gripping area was higher than the static compressive failure strain,which caused the fracture at the gripping area.This result provides insight into the failure mode discovered when using ASTM D3039 standard for obtaining the tensile properties of polymer matrix 3D-woven composites.关键词
三维机织/复合材料/拉伸/失效模式Key words
3D-woven/composite/tensile/failure mode分类
通用工业技术引用本文复制引用
张建..树脂基三维机织复合材料拉伸失效模式研究[J].玻璃钢/复合材料,2017,(5):28-33,6.基金项目
国家国际科技合作专项资助基金项目(2015DFA71500) （2015DFA71500）
