理化检验-物理分册2017，Vol.53Issue(5)：303-308,332,7.DOI:10.11973/lhjy-wl201705001
使用电化学动电位再活化法研究热处理工艺对304不锈钢晶间腐蚀敏感性的影响
Influence of Heat Treatment Process on the Intergranular Corrosion Susceptibility of 304 Stainless Steel Evaluated by Electrochemical Potentiodynamic Reactivation Method
摘要
Abstract
Electrochemical potentiodynamic reactivation (EPR) method was used to study the intergranular corrosion susceptibility of the 304 stainless steel under different heating temperature,holding time and cooling mode.The results show that:the EPR method could quantitatively evaluate the intergranular corrosion susceptibility of the 304 stainless steel;the sensitization would happen to the 304 stainless steel when the heat treatment temperature was 500-800 ℃,and the sensitization degree was highest at approximately 650 ℃;when the 304 stainless steel was heat treated at the temperature of above 650 ℃,rapid cooling could effectively reduce the sensitization degree of intergranular corrosion,but furnace cooling would increase its sensitization degree.关键词
电化学动电位再活化法/304不锈钢/晶间腐蚀敏感性/热处理/敏化度Key words
electrochemical potentiodynamic reactivation method/304 stainless steel/intergranular corrosion susceptibility/heat treatment/sensitization degree分类
矿业与冶金引用本文复制引用
谢春玉,黄子东,陈丽玲,洪泽浩,刘小红,魏亮新..使用电化学动电位再活化法研究热处理工艺对304不锈钢晶间腐蚀敏感性的影响[J].理化检验-物理分册,2017,53(5):303-308,332,7.基金项目
广东省质监局科技计划资助项目(2016ZZ06) （2016ZZ06）
