高技术通讯2017，Vol.27Issue(2)：162-167,6.DOI:10.3772/j.issn.1002-0470.2017.02.008
HTF58X2注塑机螺杆筒温度的模糊PID控制
Fuzzy-PID control of the screw barrel temperature of a HTF58X2 injection molding machine
摘要
Abstract
The characteristics and requirements of a HTF58X2 injection molding machine's screw barrel temperature control system were analyzed.Considering that traditional PID controllers' screw barrel temperature control system is difficult to obtain the satisfactory temperature control because of its features of non-linearity, pure lag and time variation, an adaptive controller using the online adjustment of PID parameters based on the fuzzy strategy was proposed.The controller can realize the on-line adjustment of its parameters by fuzzy reasoning according to the iste input temperature deviation and the variance rate of the deviation to adapt itself to the best matching of PID parameters under different working conditions.The results of the Matlab/Simulink simulation and experiment show that the fuzzy-PID controller has certain advantages in the aspects of adjusting speed, overshoot and adaptive ability in comparison with the fixed parameter PID controller.关键词
注塑机/螺杆筒温控系统/常规PID控制器/模糊控制器/仿真与实验Key words
injection molding machine/screw barrel temperature control system/conventional PID controller/fuzzy controller/simulation and experiment引用本文复制引用
徐锋,杨彦青,楼平..HTF58X2注塑机螺杆筒温度的模糊PID控制[J].高技术通讯,2017,27(2):162-167,6.基金项目
浙江省科技厅公益技术研究工业(2015C31132)资助项目. （2015C31132）
