材料工程2017，Vol.45Issue(3)：1-6,6.DOI:10.11868/j.issn.1001-4381.2016.000600
石墨烯增强镍基粉末高温合金复合材料的力学性能
Mechanical Properties of Graphene Reinforced Nickel-based P/M Superalloy
吉传波 1王晓峰 1邹金文 1杨杰1
作者信息
- 1. 北京航空材料研究院先进高温结构材料重点实验室,北京100095
- 折叠
摘要
Abstract
The graphene nanosheets were dispersed in the superalloy powder by using the wet mixing method,and then the nickel based FGH96 P/M superalloy was prepared with hot isostatic pressing (HIP) +hot extrusion(HEX) +hot isothermal forging(HIF) + heat treating(HT) processes.The results show that the graphene well disperses in the superalloy powder and keeps its original form during the following hot processing.After 0.1％ (mass fraction) graphene is added,the average room temperature tensile strength and yield strength increase by 58MPa and 43MPa respectively,and the ductility increases from 21.0％ to 37.3％;the tensile strength and yield strength at 650℃ increase by 58MPa and 28MPa,and the ductility increases from 18.5％ to 26.5％.The mechanism of strengthening and toughening reinforcement was also analyzed based on graphene reinforced FGH96 superalloy.关键词
石墨烯/粉末高温合金/湿混/力学性能Key words
graphene/P/M superalloy/wet mixing/mechanical property分类
通用工业技术引用本文复制引用
吉传波,王晓峰,邹金文,杨杰..石墨烯增强镍基粉末高温合金复合材料的力学性能[J].材料工程,2017,45(3):1-6,6.
