现代制造工程Issue(6)：99-103,129,6.DOI:10.16731/j.cnki.1671-3133.2017.06.019
铝合金铣削加工三维有限元模拟研究
Study on the 3D finite element simulation of milling for aluminum alloy
摘要
Abstract
The finite element simulation has been becoming one kind of common method used in the study of metal cutting.The ABAQUS was used to build the finite element model of milling for 7075-T7451 aerospace aluminum alloy.The geometry model,material law ere were built and the boundary conditions,separation criterion and friction conditions were determined.The whole process of milling was simulated and the prediction of chip shape,distribution of stress and strain,distribution of temperature and cutting force were achieved.The influences of mass scaling and mesh size on the prediction of cutting force were investigated quantitatively.These are the contribution for promoting the application of finite element simulation technology in metal cutting,and also is the foundation of milling parameters optimization.关键词
铣削加工/三维有限元模拟/铝合金Key words
milling/3D finite element simulation/aluminum alloy分类
信息技术与安全科学引用本文复制引用
姚辉,李国和,李文珍..铝合金铣削加工三维有限元模拟研究[J].现代制造工程,2017,(6):99-103,129,6.基金项目
天津市高等学校科技发展基金计划项目(KJY1306) （KJY1306）
天津市科技支撑计划重大项目(14ZCZDGX00002) （14ZCZDGX00002）
天津职业技术师范大学优秀青年教师资助项目(RC14-11) （RC14-11）
天津高等学校创新团队培养计划项目(TD12-5043) （TD12-5043）
