| 注册
首页|期刊导航|农业机械学报|大型立式轴流泵装置叶轮选型模型试验分析

大型立式轴流泵装置叶轮选型模型试验分析

谢传流 汤方平 刘超 杨帆 石丽建 段小汇

农业机械学报2017,Vol.48Issue(6):94-99,131,7.
农业机械学报2017,Vol.48Issue(6):94-99,131,7.DOI:10.6041/j.issn.1000-1298.2017.06.012

大型立式轴流泵装置叶轮选型模型试验分析

Model Test Analysis of Impeller Selection in Large Vertical Axial Flow Pumping System

谢传流 1汤方平 1刘超 1杨帆 1石丽建 1段小汇1

作者信息

  • 1. 扬州大学水利与能源动力工程学院,扬州225100
  • 折叠

摘要

Abstract

The selection of impeller of axial flow pump has a direct impact on the flow,head,and efficiency of the pump device;whether the impeller matches the actual working conditions of the axial flow pump device is the most important part as far as the design and energy saving are concerned.The improper selection could result in deviation of operating conditions of pump,the reduction of service efficiency,and the increase of unit vibration;consequently further influenced the efficiency,safety and stable operation of the pump station.Thus it is of great significance to choose a proper type of impeller for the operation of axial flow pump.Based on the vertical axial flow pump model test,the method of selection of pump impeller was analyzed;on the basis of the traditional method,the method with reference to the weighted average flow rate,weighted average efficiency and weighted average NPSH of the pump station was added.Finally,test program 3 was chosen:the blade placement angle was 6°,the flow rate was 398.5 L/s,the head was 6.07 m,the efficiency was 75.5%,the NPSH was 7.4 m,the performance was the optimal at design points,the high efficiency area was wide,the weighted average flow rate was 414.25 L/s,the weighted efficiency was 71.385%,the weighted average NPSH was 8.435 m,and the overall performance was the best.The chosen program 3,given the guaranteed design parameters of the pump device,can give full play to the pump more effectively and generate greater economic and social benefits,thus providing reference for future similar projects.

关键词

立式轴流泵/叶轮/泵站/选型/模型试验

Key words

vertical axial flow pump/impeller/pumping station/selection/model test

分类

机械制造

引用本文复制引用

谢传流,汤方平,刘超,杨帆,石丽建,段小汇..大型立式轴流泵装置叶轮选型模型试验分析[J].农业机械学报,2017,48(6):94-99,131,7.

基金项目

国家自然科学基金项目(51376155、51609210)、中国博士后科学基金项目(2016M591932)、江苏高校优势学科建设工程项目(PAPD)和江苏省科研创新计划项目(KYZZ16_0492) (51376155、51609210)

农业机械学报

OA北大核心CSCDCSTPCD

1000-1298

访问量1
|
下载量0
段落导航相关论文