轻工机械2017，Vol.35Issue(3)：79-82,4.DOI:10.3969/j.issn.1005-2895.2017.03.018
基于正交试验的遥控器双色前壳翘曲变形优化
Optimization of Warping Deformation of Remote Double Color Front Shell Based on Orthogonal Test
黄海龙 1周亮1
作者信息
- 1. 吉林大学 工程训练中心, 吉林 长春 130025
- 折叠
摘要
Abstract
Double color plastic warping deformation quick optimization method was proposed based on orthogonal test and AMI numerical simulation according to the influence of warping deformation on assembly quality and product overall appearance in the process of double color injection molding of remote shell.Double color injection molding simulation of remote control front shell was carried out by AMI finite element analysis software and warping deformation of materials under different process parameters was obtained by multi-factor orthogonal experiment.Taking the minimum value of warping deformation maximum as research target, test results data were analyzed by range and variance, influence of different process parameters on the test results was determined, and the optimal process parameters combination of product warping deformation minimum was finally determined.Research results show that the optimization method can quickly optimize the warpage of double-color plastic in the injection molding process.关键词
双色注塑/翘曲变形/AMI软件/正交试验Key words
double color injection molding/warping deformation/AMI/orthogonal test分类
化学化工引用本文复制引用
黄海龙,周亮..基于正交试验的遥控器双色前壳翘曲变形优化[J].轻工机械,2017,35(3):79-82,4.
