现代电子技术2017，Vol.40Issue(13)：168-170,3.DOI:10.16652/j.issn.1004-373x.2017.13.044
对数螺旋锥齿轮有限元接触分析前处理
Pretreatment of finite element contact analysis for logarithmic spiral bevel gear
摘要
Abstract
The necessary premise of dynamic contact analysis of logarithmic spiral bevel gear is to establish the accurate finite element analysis model. The mesh selection and classification methods of the logarithmic spiral bevel gear are studied in the en-vironment of HyperMesh finite element preprocessing. A new single-tooth meshing method is proposed on the basis of the generally-used single-tooth meshing method to improve the quality of hexahedral mesh. The key issues of dynamic contact analysis of loga-rithmic spiral bevel gear are analyzed and researched to establish its accurate dynamic mesh finite element analysis model,which provides a necessary precondition to simulate the dynamic mesh performance of logarithmic spiral bevel gear objectively and truly.关键词
对数螺旋锥齿轮/网格划分/动态接触/有限元分析模型Key words
logarithmic spiral bevel gear/meshing/dynamic contact/finite element analysis model分类
信息技术与安全科学引用本文复制引用
李强,常云龙,蒋建锋,王丽婷..对数螺旋锥齿轮有限元接触分析前处理[J].现代电子技术,2017,40(13):168-170,3.基金项目
内蒙古自然科学基金项目(2011MS0702) （2011MS0702）
内蒙古自治区研究生科研创新资助项目(S20131012703) （S20131012703）
