铸造技术2017，Vol.38Issue(6)：1493-1496,4.DOI:10.16410/j.issn1000-8365.2017.06.062
球墨铸铁轴封体铸造工艺设计及数值模拟
Casting Process Design and Numerical Simulation of Ductile Iron Shaft Seal
魏胜辉 1张帆 1卢景秀 1刘瑞玲1
作者信息
- 1. 河北科技大学材料科学与工程学院,河北石家庄050000
- 折叠
摘要
Abstract
The riser and gating system of ductile iron shaft seal casting were designed respectively on the basis of pressure controlled riser and proportional solidification theory,and the filling and solidification processes were simulated using simulation software.The designs of gating system and riser were basically the same by comparing the two processes.The feeding processes of the two risers are different,but the final castings without shrinkage and porosity were obtained by comparing the simulation processes.Therefore,the same feeding effect can be obtained when the riser is designed by pressure controlled riser and proportional solidification theory.关键词
控制压力冒口/均衡凝固理论/大孔出流/数值模拟Key words
pressure controlled riser/proportional solidification theory/macroporous outflow/numerical simulation分类
矿业与冶金引用本文复制引用
魏胜辉,张帆,卢景秀,刘瑞玲..球墨铸铁轴封体铸造工艺设计及数值模拟[J].铸造技术,2017,38(6):1493-1496,4.
