华中科技大学学报（自然科学版）2017，Vol.45Issue(7)：74-77,4.DOI:10.13245/j.hust.170714
填料对电弧触发器特性的影响
Effect of filler material on arc-trigger characteristic
摘要
Abstract
Effects of silica sand and sodium silicate sand on temperature-rise and pre-arcing characteristics of an arc-trigger which rated currnet is 2 kA was studied respectively by simulation modeling based on the platform of ANSYS.Simulation results show that filler material is not obvious in affecting temperature-rise characteristic but the pre-arcing time and Joule-integral would be extended, and silica sand has shorter pre-arcing time compared with sodium silicate sand.Arc-trigger with different filler material were manufactured for temperature-rise and pre-arcing tests and the experimental results are in good agreement with simulation results, arc-trigger with silica sand is about 21.1% lower than that with sodium silicate sand in pre-arcing Joule-integral, indicating that the arc-trigger with silica sand has better performance in fault current detection.关键词
电弧触发器/填料/温升特性/弧前特性/混合型限流熔断器Key words
arc-trigger/filler material/temperature-rise characteristic/pre-arcing characteristic/hybrid current limiting fuse分类
信息技术与安全科学引用本文复制引用
李枫,庄劲武,方伟,江壮贤..填料对电弧触发器特性的影响[J].华中科技大学学报（自然科学版）,2017,45(7):74-77,4.基金项目
国家自然科学基金资助项目(51307179) （51307179）
海军工程大学自然科学基金资助项目(435517F21). （435517F21）
