塑料科技2017，Vol.45Issue(7)：87-90,4.DOI:10.15925/j.cnki.issn1005-3360.2017.07.013
基于Moldflow和DOE技术的塑料三角架注射工艺参数优化
Optimization of Injection Processing Parameters For Plastic Tripod Based on Moldflow and DOE Technology
摘要
Abstract
In order to obtain the best process parameters,shorten the design cycle and reduce the test cost of mould for the plastic tripod,the work should be done to analyze the injection technique using Moldflow.Firstly,the model of plastic tripod was constructed by software Pro/E,and DOE technology was employed to get the most significant affecting factors on warpage,then optimize the parameters of injection for minimizing warpage with orthogonal experiment method.The experimental results show that the informations are obtained including best gate position and warpage distribution in the product with optimized process route,and the relationship between the warpage deformation with injection temperature and dwell pressure is investigated in deal,which could play a good rule in improving the product quality,shortening the product design cycle and improving the designing level of the mould.关键词
Moldflow/正交试验/DOE试验/翘曲变形Key words
Moldflow/Orthogonal test/DOE experiment/Warpage分类
信息技术与安全科学引用本文复制引用
牛吉梅..基于Moldflow和DOE技术的塑料三角架注射工艺参数优化[J].塑料科技,2017,45(7):87-90,4.基金项目
广东省高等教育教学研究和改革项目(52-SC150303) （52-SC150303）
华南理工大学广州学院专业综合改革试点项目(JY150701) （JY150701）
