无机材料学报2017，Vol.32Issue(7)：758-764,7.DOI:10.15541/jim20160600
高可见光透过、高紫外截止镀膜玻璃的制备
Preparation of Coating Glass with High Visible Transmittance and High UV Cut-off
摘要
Abstract
A glass with a honeycomb surface was prepared by a reverse micellar solution etching technology. The honeycomb surface might reduce the light reflection and increase the average transmittance of visible light by nearly 7%. The chemical etching technology is environment friendly for unuse of HF or fluosilicate. To compare the visible light transmittance of the coated glass, CeO2/TiO2 films were deposited on the honeycomb surface glass and raw glass by radio frequency magnetron sputtering. A series of optimization experiments were carried out to obtain a coated glass with high visible transmittance and high UV cut-off. The samples were characterized by UV-Vis spectropho-tometer, SEM, XRD, and XPS. When the UV cut-off ratios were 99% for both the honeycomb surface glass and the raw glass, the average transmittance of visible light was 85% for the coated honeycomb surface glass, and only 79%for the coated raw glass prepared under the same coating conditions. In addition, the porous structure on the glass sur-face also improved the contact area between the film and the substrate. Therefore, the binding force between film and substrate was increased by about 2 times.关键词
多孔玻璃/透过率/CeO2/TiO2薄膜/磁控溅射Key words
porous glass/transmittance/CeO2/TiO2 coating/magnetron sputtering分类
化学化工引用本文复制引用
王红燕,张浩,姜宏,汪国庆,熊春荣..高可见光透过、高紫外截止镀膜玻璃的制备[J].无机材料学报,2017,32(7):758-764,7.基金项目
海南省重点研发计划项目(ZDYF2016017) （ZDYF2016017）
国家自然科学基金(51562008)Key Research and Development Project of Hainan Province(ZDYF2016017) （51562008）
National Natural Science Foundation of China(51562008) （51562008）
