| 注册
首页|期刊导航|物理学报|基于伪相关函数的多级电平编码符号信号通用无模糊跟踪方法

基于伪相关函数的多级电平编码符号信号通用无模糊跟踪方法

刘桢 黄洁 王建涛 赵拥军 陈世文

物理学报2017,Vol.66Issue(13):298-310,13.
物理学报2017,Vol.66Issue(13):298-310,13.DOI:10.7498/aps.66.139101

基于伪相关函数的多级电平编码符号信号通用无模糊跟踪方法

Generalized unambiguous tracking method based on pseudo correlation function for multi-level coded symbol modulated signals

刘桢 1黄洁 1王建涛 1赵拥军 1陈世文1

作者信息

  • 1. 信息工程大学导航与空天目标工程学院, 郑州 450001
  • 折叠

摘要

Abstract

The global navigation satellite system (GNSS) signal modulation type plays a crucial role in determining the performances of positioning, navigation and timing (PNT) services. Currently, the binary offset carrier (BOC) modulation signal and binary coded symbol (BCS) modulation signal are both bipolar signals, which greatly restrict the room of improving the GNSS signal performance. Therefore, multi-level coded symbol (MCS) modulation has received great attention in the field of GNSS signal design. The MCS modulation is the most extensive step-coded symbol modulation mode, where BOC modulation and BCS modulation are its special cases. Since the waveform symbol of the MCS modulation signal can be arbitrarily valued, the optimal GNSS signal can be designed. However, like the BOC modulation signal, the MCS modulation signal also has the problem of ambiguous tracking, and then results in a large pseudo range measurement error, which is unacceptable for the new generation GNSS with high accuracy. In recent years, the unambiguous tracking of GNSS signals has become a hot research subject in the navigation signal processing domain and many methods are presented, and those methods can be divided into three categories: BPSK-like method, bump jump (BJ) method, and side-peak cancellation (SC) method. However, these methods are designed for BOC signal, and they are not suitable for MCS signal. Therefore, in this paper we propose a general unambiguous tracking algorithm based on the pseudo correlation function (PCF), which is suitable for MCS modulated signals. Firstly, the unitary expression of MCS modulated signal based on waveform value vector is given, then the unitary formula of cross-correlation function for MCS signal is derived and the definition of PCF is given. Then the constraint condition which should be satisfied to realize unambiguous tracking is analyzed in depth, and the universal constructing method of two reference signals and the relationship between each other are derived according to this constraint condition, which brings great convenience for solving the specific MCS signal. The code tracking loop model of GNSS receiver based on the proposed method is illustrated. It is observed that the proposed method can receive different MCS signals under the same receiver loop framework, and can simplify the design of the receiver while eliminating the tracking ambiguous problem. Finally, as a special case of MCS signal, the applications of the proposed method in four kinds of BOC signals are discussed respectively, and then the waveform value vector of the reference signal and the unitary expression of code discriminator are derived. Simulation results show that the proposed method can effectively solve the ambiguous tracking problem of MCS signal, which has good performance and broad application prospect.

关键词

全球导航卫星系统/多级电平编码符号/无模糊跟踪/伪相关函数

Key words

global navigation satellite system/multi-level coded symbol/unambiguous tracking/pseudo correlation function

引用本文复制引用

刘桢,黄洁,王建涛,赵拥军,陈世文..基于伪相关函数的多级电平编码符号信号通用无模糊跟踪方法[J].物理学报,2017,66(13):298-310,13.

基金项目

国家自然科学基金(批准号: 61501513)资助的课题. Project supported by the National Natural Science Foundation of China (Grant No. 61501513). (批准号: 61501513)

物理学报

OA北大核心CSCDCSTPCDSCI

1000-3290

访问量0
|
下载量0
段落导航相关论文