中国电力2017，Vol.50Issue(7)：169-174,6.DOI:10.11930/j.issn.1004-9649.2017.07.169.06
基于有限元温度场仿真的排管敷设电缆及新增电缆的位置优化
Position Optimization of Existing and Added Cables Based on Finite Element Method
郭然 1牛海清 1吴炬卓2
作者信息
- 1. 华南理工大学电力学院,广东广州510640
- 2. 珠海供电局,广东珠海519000
- 折叠
摘要
Abstract
The mode of laying power cable in pipes was designed to allow additional cable circuits to meet the future load increase.For different positions of original and additional cables,the temperature field and ampacity are different.It is,therefore,necessary to optimize the positions of original cables and additional ones.A finite element model is built in this paper by taking the 3 ×4 pipes for laying distribution cables as an example,and the validity of the model is verified by comparing the results of temperature-rise experiments and that of simulation.Based on the model,the positions of the original 6-circuit and 1 additional circuit are optimized based on the lowest conductor temperature of the most serious heating cable under the condition of same ampactiy for all circuits.The simulation result shows that the more scattered the cables are,the more uniform the temperature field is,and the lower the conductor temperature of the most serious heating cable.The optimal position of the additional cable is related to the position of original cables.Therefore,it is suggested that the future additional cables should be taking into account when optimizing the original position of cables.关键词
排管敷设/有限元法/温度计算/增设电缆/位置优化Key words
pipe laying/finite element method/temperature calculations/additional cable/position optimization分类
信息技术与安全科学引用本文复制引用
郭然,牛海清,吴炬卓..基于有限元温度场仿真的排管敷设电缆及新增电缆的位置优化[J].中国电力,2017,50(7):169-174,6.
