高压电器2017，Vol.53Issue(7)：19-24,29,7.DOI:10.13296/j.1001-1609.hva.2017.07.004
基于子模型法的金具优化设计及其在±1100kV阀厅中的应用
Optimization Design of Fittings and Its Application in ±1 100 kV Valve Hall Based on Sub-model Method
杜鹏飞 1程杉 1杜志叶 2金硕2
作者信息
- 1. 三峡大学电气与新能源学院,湖北宜昌443002
- 2. 武汉大学电气工程学院,武汉430072
- 折叠
摘要
Abstract
Optimization of fittings can improve the surface electric field distribution,but if the procession is completed in the whole model or separate calculation will greatly increase the amount of calculation and produce large errors respectively.Therefore,this study used sub-model method to precisely extract the boundary conditions of the single fittings in the whole model for the optimization.The effectiveness of the method validated by the theoretical analysis and numerical examples,then it is applied to the optimization design of the internal fittings of the ±1 100 kV valve hall.This method can avoid the repeated calculation of the whole model in the optimization process,which not only ensures the accuracy of the calculation,but also reduces the amount of calculation.关键词
阀厅/金具优化/子模型法/边界条件Key words
valve hall/optimization of fittings/sub-model method/boundary condition引用本文复制引用
杜鹏飞,程杉,杜志叶,金硕..基于子模型法的金具优化设计及其在±1100kV阀厅中的应用[J].高压电器,2017,53(7):19-24,29,7.
