高压电器2017，Vol.53Issue(7)：100-105,112,7.DOI:10.13296/j.1001-1609.hva.2017.07.016
电网设备状态检测真型实验平台的设计与实现
Design and Implementation of Experiment Platform for Power Equipment State Detection
段大鹏 1程序 1任志刚 1陶诗洋 1谷禹 1李伟 1张学哲 1陈平1
作者信息
- 1. 国网北京电力科学研究院,北京 100075
- 折叠
摘要
Abstract
Focus on the problem of lacking of power equipment experiment system for researching of state detection technology,the present situation and problems of state detection,especially charged testing technology are summarized in this paper firstly,Based on the actual situation,the design scheme of simulation experiment platform for power equipment state detection is put forward.Then,design improvements of mechanical structure,insulating property,optimal inner sensor placement and typical defects are completed making use of GIS of 110 kV,transformer,HV cable,switchgear of 10 kV,prefabricated substation etc.Inner partial discharge sensors are designed and set in the transformer,GIS and HV cable.Experiment platform for power equipment condition monitoring is completed.Using this system,the partial discharge defects in the equipment are set and detected using the inner sensors and portable partial discharge detection instruments.R&D,application,skill training,instrument calibration and comparison of power equipment state detection technology can be completed using the system.The system can simulate the actual operating condition of substation and typical defects of various transmission and distribution equipment,and is of great significance to research and application of state detection technology.关键词
电网设备/状态检测/真型模型/局部放电/缺陷模拟Key words
power equipment/state detection/real model/partial discharge/defects simulation引用本文复制引用
段大鹏,程序,任志刚,陶诗洋,谷禹,李伟,张学哲,陈平..电网设备状态检测真型实验平台的设计与实现[J].高压电器,2017,53(7):100-105,112,7.
