机械与电子2017，Vol.35Issue(7)：23-26,4.
主轴滚子轴承铣削加工中切削深度优化量算
On the Optimization Calculation of the Depth of Cut in Spindle Roller Bearing Milling
陈运胜1
作者信息
- 1. 广州华立科技职业学院,广东 广州 511325
- 折叠
摘要
Abstract
It is necessary to design an optimization calculation model for depth of cut (DOC) in order to improve the milling process level.In this research,an optimization calculation method for the DOC in spindle roller bearings milling was firstly proposed based on the DOC error correction in the multi-axis linkage processing.Then,a mathematical model for milling parameters and processing quality of spindle roller bearings was constructed by response surface analysis.In addition,a multi-objective optimization model was set up by optimizing the parameters with the tip clearance coefficient and DOC as the objective.Finally,the optimization calculation of the parameters of spindle roller bearings milling was achieved by correcting the errors of DOC with the multi-axis linkage constraints of cutting and feeding speed.The simulation results show that when the presented method is applied,the overall optimization performance of the processing parameters is better,the cutting precision is higher,and the processing error is smaller.关键词
主轴滚子轴承/铣削加工/切削深度/多轴联动Key words
spindle roller bearings/milling/depth of cut/multi-axis linkage分类
矿业与冶金引用本文复制引用
陈运胜..主轴滚子轴承铣削加工中切削深度优化量算[J].机械与电子,2017,35(7):23-26,4.
