烟草科技2017，Vol.50Issue(7)：100-104,5.
卷烟供丝系统的优化设计
Optimized design of cut tobacco feeding system for cigarette makers
刘亦坚 1陈占民 2任谦 3赵凯 4张宏 5孙觅 6熊安言6
作者信息
- 1. 河南中烟有限责任公司洛阳卷烟厂,河南省洛阳市南昌路南端 471003
- 2. 陕西中烟有限责任公司澄城卷烟厂,陕西省澄城县城关镇南大街588号 715200
- 3. 秦皇岛烟草机械有限责任公司,河北省秦皇岛市经济技术开发区永定河道3号 066004
- 4. 洛阳威加机械工程有限公司,河南省洛阳高新区东马沟工业园22号 471003
- 5. 北京长征高科技公司,北京市丰台区东高地万源西里19栋 100076
- 6. 河南中烟有限责任公司技术中心,郑州市陇海东路72号 450000
- 折叠
摘要
Abstract
In order to reduce tobacco degradation, dust contamination and tobacco output fluctuation, the cut tobacco feeding system was improved. Instead of the flappers in the cut tobacco silo, a flexible discharging device was used to discharge tobacco in a more flexible way. The tobacco spreading disc was replaced by a screen disc to separate short strand and dust effectively. The results showed that long strand increased by 1.43 percentage points, short strand, loose end cigarette and dust content decreased by 0.95, 0.11 and 0.25 percentage points, respectively; the standard deviations of individual weight and draw resistance of cigarette reduced by 5 mg and 5.7 Pa, respectively. The purity of cut tobacco is promoted, the breakage of cut tobacco is reduced, cigarette quality and its consistency are improved.关键词
供丝系统/储丝柜/柔性出料装置/配丝装置/分配圆盘/烟丝造碎Key words
Cut tobacco feeding system/Cut tobacco silo/Flexible discharging device/Cut tobacco distributer/Spreading disc/Cut tobacco breakage分类
轻工纺织引用本文复制引用
刘亦坚,陈占民,任谦,赵凯,张宏,孙觅,熊安言..卷烟供丝系统的优化设计[J].烟草科技,2017,50(7):100-104,5.
