铸造技术2017，Vol.38Issue(7)：1663-1665,3.DOI:10.16410/j.issn1000-8365.2017.07.036
基于单因素试验的连杆衬套磨损量研究
Research on Wear Amount of Connect-rod Bushing Based on Single Factor Test
摘要
Abstract
Through the single factor test,the reciprocating friction and wear test was designed under different working condition (load,spindle speed and fit clearance) by connecting rod bushing-piston pin swing back and forth friction and wear tester,and the wear amount of connecting rod bushing was measured.The results show that,with load increasing,the wear amount of connecting rod bushing increases;with the spindle speed increasing,the wear-amount increases;with fit clearance increasing,the wear amount decreases.关键词
连杆衬套/单因素试验/磨损量Key words
connecting rod busing/single factor test/wear amount分类
矿业与冶金引用本文复制引用
樊文欣,张涛,佘文韬,冯再新,杨刚..基于单因素试验的连杆衬套磨损量研究[J].铸造技术,2017,38(7):1663-1665,3.基金项目
山西省自然科学基金资助项目(2012011023-2) （2012011023-2）
山西省高校高新技术产业化项目资助(20120021) （20120021）
