铸造技术2017，Vol.38Issue(7)：1769-1772,4.DOI:10.16410/j.issn1000-8365.2017.07.064
进气口法兰体铸造工艺优化
Casting Process Optimization of Air Inlet Flange
梅勇祥 1于赟 1丁杰 2季火绩2
作者信息
- 1. 江苏理工学院,江苏常州213001
- 2. 常州华德机械有限公司,江苏常州213234
- 折叠
摘要
Abstract
There are shrinkage and porosity defects in the lower thick-thin junction of the flange castings in the production of flange.In order to eliminate the defects,the casting technology and the structure of the flange casting was analyzed and optimized by MAGMAsoft.The shrinkage and porosity were solved after process optimization.关键词
法兰体/MAGMAsoft/工艺优化/结构优化/凝固模拟Key words
flange/MAGMAsoft/casting process optimization/structural optimization/solidification simulation分类
金属材料引用本文复制引用
梅勇祥,于赟,丁杰,季火绩..进气口法兰体铸造工艺优化[J].铸造技术,2017,38(7):1769-1772,4.
