机械科学与技术2017，Vol.36Issue(8)：1303-1306,4.DOI:10.13433/j.cnki.1003-8728.2017.0826
CNT/高岭土陶瓷薄片温度传感器的实验研究
Experimental Study on CNT/Kaolin Ceramic Chip Temperature Sensor
摘要
Abstract
To Mix different proportions of carbon nanotube (CNT) and Kaolin evenly and sinter them at 1 500 ℃ fabricate CNT/Kaolin micro porous ceramic material.It is found in experiment that the micro porous ceramic material show the semi-conductive character.When the temperature reaches a threshold,the ceramic material composite would be conductive.The resistivity of ceramic material will decrease with the increasing of temperature.The characteristic of ceramic material shows a new method to manufacture high temperature sensors.In this paper,the CNT/Kaolin micro porous ceramic material is incised into thin plate specimens and installed heat resisting electrodes to manufacture high temperature sensors.It's obvious that the high temperature sensors are competent for high temperature measurement from research results.The new high temperature sensor could be applied in many high temperature fields in the feature,such as aerospace engineering and jet engine.关键词
碳纳米管(CNT)/高岭土/陶瓷/高温传感器Key words
carbon nanotube(CNT)/kaolin/ceramic/high temperature sensors分类
机械制造引用本文复制引用
黄楷焱,陈泽芸,童疏影,袁卫锋..CNT/高岭土陶瓷薄片温度传感器的实验研究[J].机械科学与技术,2017,36(8):1303-1306,4.基金项目
国家自然科学基金面上项目(11472232)与绵阳市科技计划项目(14G-06-3)资助 （11472232）
