人工晶体学报2017，Vol.46Issue(7)：1408-1410,1420,4.
超声辅助脉冲电沉积Ni-TiN复合镀层制备工艺研究
Preparation Process of Ni-TiN Composite Coating by Ultrasonic Assisted Pulsed Electrodeposition Method
摘要
Abstract
Ni-TiN composite coatings were prepared by ultrasound-assisted electrodepositing method on 45# streel.The composite coating was detected by XRD diffraction.And the 3-dimensional surface topography of the composite coatings were observed and analyzed by using atomic force microscopy (AFM) and transmission electron microscopy (TEM).The result indicate that the diffraction peak intensity of Ni-TiN nano composite coating is the highest, and the Ni and TiN phases are significantly refined when the ultrasonic power is 300 W.The distribution of TiN nanoparticles is uniform, and there is no significant aggregation in the coating.关键词
超声辅助电沉积/Ni-TiN/复合镀层/工艺Key words
ultrasound-assisted electrodepositing method/Ni-TiN/composite coating/process分类
通用工业技术引用本文复制引用
岳文喜..超声辅助脉冲电沉积Ni-TiN复合镀层制备工艺研究[J].人工晶体学报,2017,46(7):1408-1410,1420,4.基金项目
国家自然科学基金(51474072) （51474072）
