高技术通讯2017，Vol.27Issue(1)：81-87,7.DOI:10.3772/j.issn.1002-0470.2017.01.010
基于Flexsim的自动化立体仓库出入库仿真与优化
Simulation and optimization of loading/unloading of an automated warehouse based on Flexsim
摘要
Abstract
The simulation and optimization of the input/output of an automated warehouse of a manufacturing enterprise were carried out.Firstly, in the case of the actual operation of the warehouse, the data of all kinds of simulation objects were collected and recorded.Then the simulation was performed by using the Flexsim software, the analysis of the simulation data was conducted, and the corresponding improvement scheme was given.Finally, the simulation software Flexsim was used to simulate and model the optimized warehouse, which was compared and analyzed with the output data of the simulation model before optimization.The results showed that the utilization rate of each console was increased by 10% to 15% compared to that before optimization, the stacker crane utilization rate was increased by 3%, the top shelf location inventory was increased, the cargo space utilization rate was improved obviously, each buffer accumulation phenomenon was significantly reduced, thus the feasibility of the optimization scheme was verified.关键词
自动化立体仓库/出入库/Flexsim仿真/优化Key words
automated warehouse/loading/unloading/Flexsim simulation/optimization引用本文复制引用
赵金萍,熊君星,邹文强,刘建胜..基于Flexsim的自动化立体仓库出入库仿真与优化[J].高技术通讯,2017,27(1):81-87,7.基金项目
国家自然科学基金(51565036)资助项目. （51565036）
