现代制造工程Issue(7)：1-4,4.DOI:10.16731/j.cnki.1671-3133.2017.07.001
不同电极材料线切割加工性能的研究
A study of different electrode materials on the machining performance in WEDM
摘要
Abstract
Discusses the machining performance of different electrode materials,namely brass wire and zinc-coated wire,in Wire-Cut Electrical Discharge Machining(WEDM).The Material Remove Rate,surface roughness and surface topography had been selected as the performance indicators.The results showed that,compared to the brass wire,the zinc-coated wire could obtain the higher material remove rate,smaller surface roughness and better surface topography when machining the Ti6Al4V steel.关键词
线切割/电极丝/黄铜丝/镀锌铜丝Key words
Wire-Cut Electrical Discharge Machining(WEDM)/electrode wire/brass wire/zinc-coated wire分类
矿业与冶金引用本文复制引用
徐中,黄禹,肖帮东,黄浩,陈志..不同电极材料线切割加工性能的研究[J].现代制造工程,2017,(7):1-4,4.基金项目
国家自然科学基金资助项目(51175207) （51175207）
