甲醇制烯烃节能工艺的开发与应用OA北大核心CSCDCSTPCD
Development and application of energy-saving process for methanol to olefins
针对甲醇制烯烃工艺中存在的有机酸露点腐蚀问题,开发了新型甲醇制烯烃产品气高温脱酸催化剂,并优化了催化剂脱酸工艺条件.在反应温度480℃、压力0.1 MPa、重时空速不大于2.3 h-1时,可实现MTO产品气中有机酸组分的高效脱除,催化剂可长周期稳定运行1 600 h,产物中有机酸含量小于5.0×10-6(w),且对产物分布无影响.基于脱酸催化剂的效果,提出了甲醇制烯烃高温脱酸节能新工艺,设计了高温产物的能量回收流程.采用Aspen Plus过程模…查看全部>>
A novel catalyst for high-temperature deacidification of the methanol to olefin(MTO) product was developed,which can solve the dew-point corrosion of organic acid in the MTO process.The deacidification reaction conditions of the catalyst were optimized.Under conditions of temperature 480 ℃,pressure 0.1 MPa,WHSV no more than 2.3 h-1,organic acid content was below 5.0 × 10-6(W) after 1 600 h running.Distribution of products was not affected by applying of the …查看全部>>
周立进;陆飞鹏;廖祖维;阳永荣
浙江大学化学工程与生物工程学院化学工程联合国家重点实验室,浙江杭州310027中国石化扬子石油化工有限公司,江苏南京210048浙江大学化学工程与生物工程学院化学工程联合国家重点实验室,浙江杭州310027浙江大学化学工程与生物工程学院化学工程联合国家重点实验室,浙江杭州310027
化学化工
甲醇制烯烃脱酸节能过程模拟
methanol to olefindeacidificationenergy savingprocess simulation
《石油化工》 2017 (7)
914-919,6
评论