铸造2017，Vol.66Issue(8)：806-809,4.
3D打印用聚乳酸复合材料的研究
Research on Polylactic Acid Composite Material for 3D Printing
李天才1
作者信息
- 1. 宁夏共享模具有限公司,宁夏银川 750021
- 折叠
摘要
Abstract
Through studying the effects of the addition of talc, composite polymer elastomer, glycerol and titanate coupling agent on the melt index, elongation at break, tensile strength and impact strength of polylactic acid composites by orthogonal test, the optimum formulation of polylactic acid composite for 3D printing was obtained. It has been proved by application examples that the developed polylactic acid composite has the characteristics of non-toxic, smooth printing, stable size of printing products and hard to shrink. Thus, the defects of warpage, cracking and poor adhesion of the printing products are solved.关键词
3D打印/聚乳酸/复合材料Key words
3D printing/polylactic acid/composite material分类
矿业与冶金引用本文复制引用
李天才..3D打印用聚乳酸复合材料的研究[J].铸造,2017,66(8):806-809,4.
