华东交通大学学报2017，Vol.34Issue(4)：91-96,6.
基于Zynq的RTU遥测量计算与误差补偿实现
Calculation and Error Compensation of RTU Measurement Based on Zynq
钟汉华 1陈剑云 1周欢1
作者信息
- 1. 华东交通大学电气与自动化工程学院,江西南昌330013
- 折叠
摘要
Abstract
In the process of developing power RTU by using Zynq-7000 series FPGA,the effective value of AC signal voltage current should be calculated in collecting telemetry information.This paper discusses measurement of the effective value through the use of modularization-based design methods and a series of Xilinx IP core.Firstly,the frequency of the input signal was calculated by digital zero-crossing method.Then RMS of the signal was calculated through integrated method.The measurement of remote communication data had certain errors as actual frequency of signal fluctuated in small scope with the changes of electrical load.And error compensation was realized by the analysis of error condition of calculation to improve the measurement accuracy of the effective value of the AC signal voltage current.Finally,IP core was made by setting interrelated parameters.Matlab and FPGA simulation results were verified consistent.关键词
Zynq-7000/电力RTU/Xilinx IP/交流信号电压电流有效值/FPGAKey words
Zynq-7000/power RTU/Xilinx IP/RMS of AC signal voltage current/field programmable gate array (FPGA)分类
信息技术与安全科学引用本文复制引用
钟汉华,陈剑云,周欢..基于Zynq的RTU遥测量计算与误差补偿实现[J].华东交通大学学报,2017,34(4):91-96,6.
