现代制造工程Issue(9)：102-108,117,8.DOI:10.16731/j.cnki.1671-3133.2017.09.018
轴类零件外圆磨削参数的优化模型与应用
Optimization model of multi-process grinding parameters for shaft parts and its application
牛同训1
作者信息
- 1. 山东工业职业学院机电工程系,淄博256414
- 折叠
摘要
Abstract
It is important how to choose the grinding parameters ,as the cost of grinding is very high.The influence of grinding pa-rameters to the surface roughness and the production efficiency was discussed.Aimed at the cutting parameters of grinding for out-er cylindrical grinding ,an optimization model which is based on the minimum process cost of grinding was established.The model is constrained by roughness of the machined surface ,the stiffness of the part ,the power of the grinding machine ,the parameters of the grinding machine ,and the grinding allowance.The variables of the optimization includes the grinding allowance ,the lengthwise travel rate of table and the depth of cut.Finally,an experiment case of a motor shaft was performed to verify the validity of the op-timization model ,compared with the traditional methods ,process costs have been reduced by almost 19%.关键词
外圆磨削/磨削用量/工艺成本/约束条件/优化模型Key words
cylindrical grinding/grinding parameters/process cost/constraint condition/optimization model分类
机械制造引用本文复制引用
牛同训..轴类零件外圆磨削参数的优化模型与应用[J].现代制造工程,2017,(9):102-108,117,8.
