电焊机2017，Vol.47Issue(9)：34-38,5.DOI:10.7512/j.issn.1001-2303.2017.09.07
SIZER软件在自动堆焊机控制系统设计中的应用
Application of SIZER in the design of automatic welding machine control system
桂鹏千 1田松亚 1杨柱 1李晓波1
作者信息
- 1. 河海大学机电工程学院,江苏常州213022
- 折叠
摘要
Abstract
Abatract:Membrane wall has been widely applied in boiler industry,but it is corroded and worn by the high temperature flue gas and the airflow in the working environment,so a layer of heat resistant and corrosion resistant material should be welded on the surface of the membrane wail.In order to ensure low dilution rate,vertical down welding is used.Automatic welding equipment is designed,including pipe racks for fixed membrane wall straight and the frame with the beam driven by the motors on the top of the frame to move from top to down.In the meantime,the welding platform is driven by the motors on the beam to move from left to right,and then complete surfacing of the membrane wall.Before welding,the welding torch gesture is adjusted by a rotating motor and two adjusting motors on the welding platform.In welding,the distance between the welding torch and the membrane wall is detected by sensors and adjusted by the two adjusting motors in order to track the welding position.The device uses eight motors to achieve multi-axis motion of the torch,which requires the construction of drive system and control system.According to the requirements of the mechanical movement,the SIZER software is used to configure the drive system and control system,technical data of all electrical components in the equipment are achieved,and foundation is laid for the production of the automatic welding equipment.关键词
膜式水冷壁/自动堆焊/驱动系统/控制系统/SIZERKey words
membrane wall/automatic surfacing/drive system/control system/SIZER分类
矿业与冶金引用本文复制引用
桂鹏千,田松亚,杨柱,李晓波..SIZER软件在自动堆焊机控制系统设计中的应用[J].电焊机,2017,47(9):34-38,5.
