| 注册
首页|期刊导航|东南大学学报(英文版)|钢渣在蒸养混凝土中应用的实验研究

钢渣在蒸养混凝土中应用的实验研究

韩方晖 刘娟红 何薛江 宋少民

东南大学学报(英文版)2017,Vol.33Issue(3):277-285,9.
东南大学学报(英文版)2017,Vol.33Issue(3):277-285,9.DOI:10.3969/j.issn.1003-7985.2017.03.005

钢渣在蒸养混凝土中应用的实验研究

Experimental studies on the utilization of steel slag in the steam-cured concrete

韩方晖 1刘娟红 1何薛江 1宋少民2

作者信息

  • 1. 北京科技大学土木与资源工程学院,北京100083
  • 2. 北京建筑大学土木与交通工程学院,北京102616
  • 折叠

摘要

Abstract

The possibility of applying steel slag as mineral admixture in steam-cured concrete was investigated. The compressive strength, chloride permeability, carbonation depth and drying shrinkage of concrete and the microstructure characteristics of hardened paste were studied. Results show that the steam-cured concrete containing steel slag at a high water-to-binder ratio has low compressive strength, coarse pore structure, moderate permeability, large carbonation depth and great drying shrinkage. The negative effects of steel slag on the mechanical and durability performance of steam-cured concrete become smaller at a low water-to-binder ratio or by adding ultrafine ground granulated blast furnace slag (UGGBS). The later-age hydration of cement is significantly promoted by adding steel slag. The pozzolanic reaction and micro-filler effect of UGGBS result in dense structure, which makes great contribution to the strength development and durability performance of steam-cured concrete. These effects of steel slag and UGGBS are significant at a low water to binder ratio. The steam-cured concrete containing steel slag-UGGBS blended mineral admixture at a low water-to-binder ratio has the best performance with high compressive strength, fine pore structure and good durability.

关键词

蒸养/钢渣/抗压强度/水化/耐久性

Key words

steam curing/steel slag/compressive strength/hydration/durability

分类

化学化工

引用本文复制引用

韩方晖,刘娟红,何薛江,宋少民..钢渣在蒸养混凝土中应用的实验研究[J].东南大学学报(英文版),2017,33(3):277-285,9.

基金项目

Postdoctoral Science Foundation of China (No. 2015M580992, 2016T90036), the Open Fund of State Key Laboratory of High Performance Civil Engineering Materials(No.2015CEM010). (No. 2015M580992, 2016T90036)

东南大学学报(英文版)

1003-7985

访问量2
|
下载量0
段落导航相关论文