流体机械2017，Vol.45Issue(9)：56-59,4.DOI:10.3969/j.issn.1005-0329.2017.09.012
无填料冷却塔冷却性能的试验研究
Research on the Cooling Efficiency of Shower Cooling Tower
摘要
Abstract
An experimental system was established for shower cooling tower,the impact of different air inlet position, air dry-bulb temperature, air-water ratio, inlet water temperature on the thermal efficiency was studied. The results show that for up-jet shower cooling tower, the cooling efficiency is higher when air was induced from tower top,for the down-jet shower cooling tower the cooling efficiency is higher when air was induced from tower bottom;the cooling efficiency increased with the air-water ratio increasing, when the ratio increased to1.8, continue to increase the air-water ratio, the efficiency of shower cooling tower increaseslowly;the cooling efficiency reduced with the outdoorair dry-bulb temperature increasing; the cooling efficiency is increased with the inlet water temperature increasing, while the increase of up-jet shower cooling tower is better than down-jet shower cooling tower.关键词
无填料冷却塔/冷却效率/进风位置/空气干球温度/气水比/进水温度Key words
shower cooling tower/cooling efficiency/air inlet position/air dry-bulbtemperature/air-waterratio/inlet water temperature分类
机械制造引用本文复制引用
张楠,李念平,崔海蛟,李胜兵,贾宇豪..无填料冷却塔冷却性能的试验研究[J].流体机械,2017,45(9):56-59,4.基金项目
"十三五"国家重点研发计划项目(2016YFC0700305,2016YFC0700306) （2016YFC0700305,2016YFC0700306）
