西安理工大学学报2017，Vol.33Issue(2)：226-232,7.DOI:10.19322/j.cnki.issn.1006-4710.2017.02.017
砂布轮抛光工艺参数对TC4表面粗糙度影响规律的研究与分析
Research on and analysis of influence of process parameters on surface roughness of TC4 by abrasive cloth wheel polishing
摘要
Abstract
Abrasive cloth wheels with great flexibility can be used for complex surface polishing.In order to grasp the influence of the law of polishing process parameters on the TC4 surface roughness and improve the polishing quality,the process parameters influence law was analyzed through the single factor experiment.The surface roughness prediction model is established based on orthogonal test results and verified to be of significance.Process parameters coupling with the influence law of the surface roughness are analyzed with the process parameters optimized by the response surface method.Finally,blade polishing experiments show that the ideal polishing results can be achieved by the prediction model and optimized process parameters.关键词
砂布轮/抛光/表面粗糙度/参数优化Key words
abrasive cloth wheel/polishing/surface roughness/parameter optimization分类
航空航天引用本文复制引用
淮文博,唐虹,李虹..砂布轮抛光工艺参数对TC4表面粗糙度影响规律的研究与分析[J].西安理工大学学报,2017,33(2):226-232,7.基金项目
国家科技重大专项基金资助项目(2015ZX040041003) （2015ZX040041003）
