中国电机工程学报2017，Vol.37Issue(18)：5446-5453,8.DOI:10.13334/j.0258-8013.pcsee.162231
基于直接转矩控制的开关磁阻电机模型预测控制方法
Direct Torque Control-Based Model Predictive Control of Switched Reluctance Motors
颜宁 1曹鑫 1张蕾 1邓智泉1
作者信息
- 1. 多电飞机电气系统工信部重点实验室(南京航空航天大学),江苏省南京市211106
- 折叠
摘要
Abstract
For the aim of reducing total output torque ripple and simplifying the control scheme,this paper studied on a new model predictive control method based on voltage vector selecting of direct torque control.This method remained the simplification and flexibility of model predictive control.Sectors where combined fiux vector was located in were utilized to determine the commutation logic,resulting in asimplified cost function.By the corresponding relation between sectors and voltage vectors,input variables of predictive controller were reduced.The new scheme avoids mass useless computation and no longer relies on hysteresis signals to generate voltage vectors,which gains a good torque ripple minimization performance on a fixed and relatively small control frequency.Thus the new scheme has the potential for further improvement and practicability.Simulations and experiments were carried out on a three-phase 12/8 structure SRM.For comparison,direct torque control and model predictive control methods were also tested.The results prove that the new method achieves the design anticipation.关键词
开关磁阻电机/模型预测控制/直接转矩控制/电压矢量/代价函数Key words
switched reluctance motor/model predictive control/direct torque control/voltage vector/cost function分类
信息技术与安全科学引用本文复制引用
颜宁,曹鑫,张蕾,邓智泉..基于直接转矩控制的开关磁阻电机模型预测控制方法[J].中国电机工程学报,2017,37(18):5446-5453,8.
