中南大学学报（自然科学版）2017，Vol.48Issue(9)：2484-2490,7.DOI:10.11817/j.issn.1672-7207.2017.09.029
直孔掏槽一次成井的改进TOPSIS-CV掏槽方式评价模型
Improved TOPSIS-CV method of cut blasting mode evaluation in one-step raise excavation with burn cut
摘要
Abstract
In order to optimize cylinder cut blasting mode for one-step raise excavation, an improved TOPSIS comprehensive evaluation model combining vertical projection approach was developed. Seven indexes considering the economy, technology and security were used, and the index weights were determined by coefficient of variance method to avoid the subjectivity. The improved evaluation model was applied to goaf dealing in a mine. Finally, the optimal scheme was applied in an industrial test. The results show that the best vertical distances between the scheme and positive of the four cutting modes were calculated and were 0.125 94, 0.089 89, 0.060 40 and 0.041 53 respectively, which indicate that the fourth scheme is optimal. Compared with the traditional TOPSIS, the improved TOPSIS tends to reveal clearer differences between schemes, which is convenient to optimize the scheme. The formed raise by optimal scheme is through up and down completely, and reaches the expected size.关键词
一次成井/掏槽方式/综合评价模型/改进TOPSIS法/变异系数法Key words
one-step raise excavation/cutting mode/comprehensive evaluation model/improved TOPSIS method/coefficient of variance分类
矿业与冶金引用本文复制引用
刘恺,李夕兵,李启月,王泽伟,谢晓锋..直孔掏槽一次成井的改进TOPSIS-CV掏槽方式评价模型[J].中南大学学报（自然科学版）,2017,48(9):2484-2490,7.基金项目
国家自然科学基金资助项目(51374243) （51374243）
中南大学博士研究生自主探索创新项目(2017zzts186) (Project(51374243)supported by the National Natural Science foundation of China （2017zzts186）
Project(2017zzts186) supported by the Cultivating Excellent PhDs of Central South University) （2017zzts186）
