玻璃钢/复合材料Issue(9)：101-105,5.
纤维增强复合材料钻削加工技术研究现状
CURRENT STATUS ON DRILLING TECHNOLOGY OF FIBER REINFORCED COMPOSITES
孙巧如 1刘晓东 2王天晨 1姚文昊 1张杰 1班晓伟1
作者信息
- 1. 航天材料及工艺研究所,北京 100076
- 2. 空军驻航天一院军事代表办公室,北京 100076
- 折叠
摘要
Abstract
Due to its characteristics of mechanical anisotropy,poor thermal conductivity ability,drilling defects such as delaminations,tear and other defects are produced during the drilling process of fiber reinforced composites.This paper reviews the effects such as drilling thrust,drilling parameters and tool geometry on drilling defects of fiber reinforced composites.Furthermore,the current status of drilling technology is analyzed.Finally,reasonable technology parameters,tool geometry and new drilling technology which are important to improve the quality of drilling technology is proposed.关键词
纤维增强复合材料/加工缺陷/钻削加工技术Key words
fiber reinforced composites/drilling defects/drilling technology分类
通用工业技术引用本文复制引用
孙巧如,刘晓东,王天晨,姚文昊,张杰,班晓伟..纤维增强复合材料钻削加工技术研究现状[J].玻璃钢/复合材料,2017,(9):101-105,5.
