钢桥腐蚀斜焊缝十字接头疲劳性能研究OA北大核心CSCDCSTPCD
Fatigue Performance of Cruciform Joint of Corrosive Inclined Weld in Steel Bridge
以45°倾角全熔透承载角焊缝十字接头为研究对象,在试件的边缘焊趾附近构造深度分别为1和2mmn的2种人工半球形蚀坑,通过疲劳试验和有限元方法分析腐蚀对斜焊缝十字接头疲劳行为的影响.结果表明:当蚀坑深度分别为0,1,和2mm时,在200万次循环加载下斜焊缝十字接头疲劳强度分别为92.4,91.3和70.2 MPa,当蚀坑深度等于或小于1 mm时,可以忽略蚀坑对斜焊缝十字接头疲劳强度的影响,但选取斜焊缝十字接头的S—N曲线时应该考虑不同腐蚀程度的影响…查看全部>>
In order to study the effect of corrosive damage on the fatigue performance of inclined weld joints in steel bridges,full penetration load-carrying fillet cruciform joint with an inclined angle of 45° are used in this study.Two artificial semi-spherical corrosion pits with the depths of 1 and 2 mm are constructed near the weld toe.The influence of corrosion on the fatigue strength of inclined weld cruciform joint is analyzed by fatigue tests and finite eleme…查看全部>>
揭志羽;李亚东;卫星;诸葛萍
宁波大学建筑工程与环境学院,浙江宁波315211西南交通大学土木工程学院,四川成都610031西南交通大学土木工程学院,四川成都610031宁波大学建筑工程与环境学院,浙江宁波315211
交通工程
钢桥腐蚀斜焊缝十字接头疲劳性能
Steel bridgeCorrosionInclined weldCruciform jointFatigue performance
《中国铁道科学》 2017 (5)
环境腐蚀下斜拉索钢丝多尺度疲劳损伤演化机理研究
37-43,7
国家自然科学基金资助项目(51378430,51378431,51708305)浙江省自然科学基金资助项目(LQ17E080005)
评论