机械制造与自动化Issue(5)：93-95,3.DOI:10.19344/j.cnki.issn1671-5276.2017.05.024
车削氧化铝陶瓷刀具磨损有限元仿真研究
Finite Element Simulation of Tool Wear in Turning Alumina Ceramic
摘要
Abstract
Based on the modified Johnson-Cook constitutive model, the cutting simulation of turning alumina ceramics is done by DEFORM. The influencing factors of the tool wear, such as cutting speed, cutting depth and cutting distance, are analyzed. The re-sults show that the maximum wear depth decreases with the increase of cutting speed, and increases with the increase of cutting depth. The simulation results of the wear depth show that the cutting process can be divided into three stages: initial wear stage, normal wear stage and rapid wear stage.关键词
刀具磨损/切削加工/氧化铝陶瓷/有限元Key words
tool wear/cutting/alumina ceramic/finite element method.分类
矿业与冶金引用本文复制引用
马廉洁,谭福慧,王佳..车削氧化铝陶瓷刀具磨损有限元仿真研究[J].机械制造与自动化,2017,(5):93-95,3.基金项目
国家自然科学基金资助项目(51275083) （51275083）
