沈阳工业大学学报2017，Vol.39Issue(6)：629-634,6.DOI:10.7688/j.issn.1000-1646.2017.06.06
典型碳纤维连接件微观结构分析
Microstructure analysis for typical carbon fiber connector
摘要
Abstract
The connection of metal fittings is connectors, so that it is necessary to connect the carbon fiber material with the metal material to meet the practical application. However, the microstructure of carbon fiber has a great influence on its performance. Aiming at the above mentioned problem, the microstructure of carbon fiber was analyzed. The PAN100 and PAN200 carbon fiber materials were prepared and taken as the research object to characterize their microstructures. The results show that the phenomenon of cross linking, adhesion or abrasion between the fiber bundles on the partial surface areas of PAN100 carbon fiber is observed. While the PAN100 carbon fiber is smoother than PAN200 carbon fiber, and has uniform surface structure, fine fiber and no cracks or holes. The physical performance of PAN200 carbon fiber is better than that of PAN100 carbon fiber, so that the PAN200 structure is more suitable for carbon fiber connector than PAN100 carbon fiber.关键词
碳纤维连接件/微观结构/展示空间/均一化处理/石墨化程度/物理性能/热稳定性/色谱法Key words
carbon fiber connector/microstructure/display space/homogenization treatment/degree of graphitization/physical property/thermal stability/chromatography分类
轻工纺织引用本文复制引用
柳丹,齐伟民,李馥颖,任艳..典型碳纤维连接件微观结构分析[J].沈阳工业大学学报,2017,39(6):629-634,6.基金项目
教育厅高校科研计划资助项目(XJEDU2016I036) （XJEDU2016I036）
住房和城乡建设部软科学研究资助项目(2009231). （2009231）
