铸造技术2017，Vol.38Issue(11)：2579-2581,3.DOI:10.16410/j.issn1000-8365.2017.11.005
Al-P变质剂制备及其变质效果研究
Al-P Inoculant Preparation and Effect of Inoculation
摘要
Abstract
The Al-P inoculant was produced by the powder metallurgy together with extrusion method,and the inoculation of the A390 alloy hypereutectic Al-Si alloy melt was processed,and the effect of the Al-Si inoculant treatment on microstructure and primary silicon size was investigated by the optical metallographic and XRD.The results show that the optimum property of the Al-P inoculant is obtained by the 570 ℃ sintering.Use of the A1-P inoculant at 780 ℃ for A390 alloy modification treament,it will dissolve quickly,the incubation time is very short,the microstructure is refinement and uniformity,the primary silicon crystallization is obviously refined,the average size is 22 μm,which is better than the refined effect of the known inoculant.关键词
粉末冶金/Al-P变质剂/A390合金/初晶硅Key words
powder metallurgy/Al-P modifier/positive extrusion/primary crystal silicon分类
矿业与冶金引用本文复制引用
张广安,赵兴明,张明昌,王鸿健,赵荣达,辛立君..Al-P变质剂制备及其变质效果研究[J].铸造技术,2017,38(11):2579-2581,3.基金项目
辽宁省高等学校优秀科技人才资助项目(LR2014017) （LR2014017）
